TEROSON ® PU 9100 is a white/gray polyurethane based body adhesive/sealant used for sealing seams and joints. It has good adhesion to painted surfaces and various metals and plastics, without the need for primer. During construction, any professional adhesive tool with a piston rod, such as TEROSON, can be used ® ET STAKU HAND GUN。 Using TEROSON ® ET GUN POWERLINE II or TEROSON ® ET AIR GUN MULTIPRESS can achieve the best application effect. Before application, it is recommended to use TEROSON ® VR 10 undergoes surface pretreatment. TEROSON PU 9100 solidifies by reacting with moisture, forming soft and elastic seams. This material is usually not suitable for conductive bonding.
Good adhesion to various metals, wood, and plastics without the need for primer
Drying time: approximately 20 to 45 minutes
A single product has both adhesive (tensile strength 1.7MPa) and sealing functions
High elasticity: about 350% (elongation at break)
After the surface is dry, it can be wet coated with paint）
Our experienced engineers and technical specialists are here to provide professional guidance, product selection, and application support tailored to your specific requirements.
